Redox-Modified Nanostructured Electrochemical Surfaces for Continuous Glucose Monitoring in Complex Biological Fluids.

Continuous glucose monitoring is valuable for people with diabetes but faces limitations due to enzyme-electrode interactions and biofouling from biological samples that reduce sensor sensitivity and the monitoring performance. We created an enzyme-based electrochemical system with a unique nanocomposite coating that incorporates the redox molecule, aminoferrocene (NH2-Fc). This coating enhances stability via electroactivity and reduces nonspecific binding, as demonstrated through cyclic voltammetry. Our approach enables real-time glucose detection via chronoamperometry with a calculated linear range of 0.5 to 20 mM and a 1 mM detection limit. Validated with plasma and saliva, this platform shows promise for robust metabolite detection in clinical and research contexts. This versatile platform can be applied to accurately monitor a wide range of metabolites in various biological matrices, improving patient outcomes.

Circulating microRNA-155-3p levels predicts response to first line immunotherapy in patients with metastatic renal cell carcinoma.

Predictive biomarkers of response to immune checkpoint-based therapies (ICI) remain a critically unmet need in the management of advanced renal cell carcinoma (RCC). The complex interplay of the tumour microenvironment (TME) and the circulating immune response has proven to be challenging to decipher. MicroRNAs have gained increasing attention for their role in post-transcriptional gene expression regulation, particularly because they can have immunomodulatory properties. We evaluated the presence of immune-specific extracellular vesicle (EV) microRNAs in the plasma of patients with metastatic RCC (mRCC) prior to initiation of ICI. We found significantly lower levels of microRNA155-3p (miR155) in responders to ICI, when compared to non-responders. This microRNA has unique immunomodulatory properties, thus providing potential biological rationale for our findings. Our results support further work in exploring microRNAs as potential biomarkers of response to immunotherapy.

Highly selective molecularly imprinted polymer nanoparticles (MIP NPs)-based microfluidic gas sensor for tetrahydrocannabinol (THC) detection.

A highly selective microfluidic integrated metal oxide gas sensor for THC detection is reported based on MIP nanoparticles (MIP NPs). We synthesized MIP NPs with THC recognition sites and coated them on a 3D-printed microfluidic channel surface. The sensitivity and selectivity of coated microfluidic integrated gas sensors were evaluated by exposure to THC, cannabidiol (CBD), methanol, and ethanol analytes in 300-700 ppm at 300 °C. For comparison, reference signals were obtained from a microfluidic channel coated with nonimprinted polymers (NIP NPs). The MIP and NIP NPs were characterized using scanning electron microscopy (SEM) and Raman spectroscopy. MIP and NIP NPs channels response data were combined and classified with 96.3% accuracy using the Fine KNN classification model in MATLAB R2021b Classification Learner App. Compared to the MIP NPs coated channel, the NIP NPs channel had poor selectivity towards THC, demonstrating that the THC recognition sites in the MIP structure enabled selective detection of THC. The findings demonstrated that the recognition sites of MIP NPs properly captured THC molecules, enabling the selective detection of THC compared to CBD, methanol, and ethanol.

Properties and Applications of Graphene and Its Derivatives in Biosensors for Cancer Detection: A Comprehensive Review.

Cancer is one of the deadliest diseases worldwide, and there is a critical need for diagnostic platforms for applications in early cancer detection. The diagnosis of cancer can be made by identifying abnormal cell characteristics such as functional changes, a number of vital proteins in the body, abnormal genetic mutations and structural changes, and so on. Identifying biomarker candidates such as DNA, RNA, mRNA, aptamers, metabolomic biomolecules, enzymes, and proteins is one of the most important challenges. In order to eliminate such challenges, emerging biomarkers can be identified by designing a suitable biosensor. One of the most powerful technologies in development is biosensor technology based on nanostructures. Recently, graphene and its derivatives have been used for diverse diagnostic and therapeutic approaches. Graphene-based biosensors have exhibited significant performance with excellent sensitivity, selectivity, stability, and a wide detection range. In this review, the principle of technology, advances, and challenges in graphene-based biosensors such as field-effect transistors (FET), fluorescence sensors, SPR biosensors, and electrochemical biosensors to detect different cancer cells is systematically discussed. Additionally, we provide an outlook on the properties, applications, and challenges of graphene and its derivatives, such as Graphene Oxide (GO), Reduced Graphene Oxide (RGO), and Graphene Quantum Dots (GQDs), in early cancer detection by nanobiosensors.

Selective detection of VOCs using microfluidic gas sensor with embedded cylindrical microfeatures coated with graphene oxide.

Volatile organic compounds (VOCs) are major environmental pollutants. Exposure to VOCs has been associated with adverse health outcomes. The monitoring of hazardous VOCs is a vital step towards identifying their presence and preventing the risk of acute or chronic exposure and polluting the environment. One of the challenges associated with monitoring VOCs is selectivity of the sensor. Microfluidic gas sensors offer selective and sensitive detection capabilities that have been recently applied for detection of VOCs. In this study, we achieve improved selectivity for detection of a range of VOCs by adding micro- and nanofeatures to the microchannel of microfluidic gas sensors. First, microfeatures are embedded into the microchannel and their geometries are optimized using Taguchi design of experiment method. In the next step the microfeatures embedded microchannel is coated with graphene oxide, to increase the surface to volume ratio by introducing nanofeatures to the surfaces. The nano- and microfeatures are characterized by SEM, XPS, and water contact angle measurement. Finally, the changes in the sensor response are compared to plain microfluidic gas sensor, the results show an average of 64.4% and 120.9% improvement in the selectivity of the sensor with microfeatures and both nano- and microfeatures, respectively.

New Insights into the Biosensing of Parkinson's Disease Biomarkers: A Concise Review.

BACKGROUND: Parkinson's disease (PD) is a long-term, degenerative, and neurological disease in which a person loses control of certain body functions. The formulation of novel effective therapeutics for PD as a neurodegenerative disease requires accurate and efficient diagnosis at the early stages. OBJECTIVE: Analyzing data gathered by measurable signals converted from biological reactions allows for qualitative and quantitative evaluations. Among various approaches reported so far, biosensors are powerful analytical tools that have been used in detecting the biomarkers of PD. METHODS: Biosensor's biological recognition components include antibodies, receptors, microorganisms, nucleic acids, enzymes, cells and tissues, and biomimetic structures. This review introduces electrochemical, optical, and optochemical detection of PD biomarkers based on recent advances in nanotechnology and material science, which resulted in the development of high-performance biosensors in this field. RESULTS: PD biomarkers such as α-synuclein protein, dopamine (DA), urate, ascorbic acid, miRNAs, and their biological roles are summarized. Additionally, the advantages and disadvantages of the usual standard methods are reviewed. We compared electrochemical, optical, and optochemical biosensors' properties and novel strategies for higher sensitivity and selectivity. CONCLUSION: The development of novel biosensors is required for the early diagnosis of PD as sensitive, rapid, reliable, and cost-effective systems.

Microfluidic On-Chip Production of Alginate Hydrogels Using Double Coflow Geometry.

Microfluidic on-chip production of microgels employing external gelation has numerous biological and pharmaceutical applications, particularly for the encapsulation of delicate cargos; however, the on-chip production of microgels in microfluidic devices can be challenging due to problems such as clogging caused by accelerated progress in precursor solution viscosity. Here, we introduce a novel microfluidic design incorporating two consecutive coflow geometries for microfluidic droplet generation. A shielding oil phase is employed to avoid emulsification and gelation stages from occurring simultaneously, thereby preventing clogging. The results revealed that the microfluidic device could generate highly monodispersed spherical droplets (coefficient of variation < 3%) with an average diameter in the range of 60-200 µm. Additionally, it was demonstrated that the device could appropriately create a shelter of the oil phase around the inner aqueous phase regardless of the droplet formation regime and flow conditions. The ability of the proposed microfluidic device in the generation of microgels was validated by producing alginate microgels utilizing an aqueous solution of calcium chloride as the continuous phase.

A selective polypyrrole-based sub-ppm impedimetric sensor for the detection of dissolved hydrogen sulfide and ammonia in a mixture.

An impedance-transducer sensor was developed for in situ detection of hydrogen sulfide (H2S) and ammonia (NH3) in aqueous media. Using cyclic voltammetry (CV), polypyrrole (PPy) was deposited on the surface of the microfabricated interdigitated gold electrode. Due to the proton acid doping effect of H2S on PPy and ionic conduction of the film, the sensor showed a decreasing impedance response to H2S unlike other reducing chemicals, i.e., ammonia (NH3). The recorded faradaic data was then associated with an equivalent circuit and compared with that of NH3 to examine the selectivity of the sensor. An electrochemical impedance spectroscopy (EIS) analysis was applied to the mixture of H2S and NH3 prepared at different ratios for the concentrations ranging from 2 ppm to 20 ppm (below 2-ppm, no response was observed due to the formation of NH4HS, not sensible with PPy). The principal component analysis (PCA) was used to train a real-time prediction model for both classification (for the type of the analyte) and regression (the concentration of the analyte). The results showed the high performance of the sensor in determining individual analytes while the model was able to accurately predict the amount of H2S and NH3 in the mixture.

Potentiodynamic Electrochemical Impedance Spectroscopy of Polyaniline-Modified Pencil Graphite Electrodes for Selective Detection of Biochemical Trace Elements.

In this study, we analyzed the application of potentiodynamic electrochemical impedance spectroscopy (PDEIS) for a selective in situ recognition of biological trace elements, i.e., Cr (III), Cu (II), and Fe (III). The electrochemical sensor was developed using the electropolymerization of aniline (Ani) on the surface of the homemade pencil graphite electrodes (PGE) using cyclic voltammetry (CV). The film was overoxidized to diminish the background current. A wide range of potential (V = -0.2 V to 1.0 V) was investigated to study the impedimetric and capacitive behaviour of the PAni/modified PGE. The impedance behaviors of the films were recorded at optimum potentials through electrochemical impedance spectroscopy (EIS) and scrutinized by means of an appropriate equivalent circuit at different voltages and at their corresponding oxidative potentials. The values of the equivalent circuit were used to identify features (charge transfer-resistant and double layer capacitance) that can selectivity distinguish different trace elements with the concentration of 10 µM. The PDEIS spectra represented the highest electron transfer for Cu (II) and Cr (III) in a broad potential range between +0.1 and +0.4 V while the potential V = +0.2 V showed the lowest charge transfer resistance for Fe (III). The results of this paper showed the capability of PDEIS as a complementary tool for conventional CV and EIS measurement for metallic ion sensing.

Nanomaterial-based encapsulation for controlled gastrointestinal delivery of viable probiotic bacteria.

Probiotics are microorganisms that have beneficial health effects when administered in adequate dosages. The oral administration of probiotic bacteria is widely considered beneficial for both intestinal as well as systemic health but its clinical efficacy is conflicted in the literature. This may at least in part be due to the loss of viability during gastrointestinal passage resulting in poor intestinal delivery. Microencapsulation technology has been proposed as a successful strategy to address this problem by maintaining the viability of probiotics, thereby improving their efficacy following oral administration. More recently, nanomaterials have demonstrated significant promise as encapsulation materials to improve probiotic encapsulation. The integration of nanotechnology with microencapsulation techniques can improve the controlled delivery of viable probiotic bacteria to the gut. The current review aims at summarizing the types of nanomaterials used for the microencapsulation of probiotics and showing how they can achieve the delivery and controlled release of probiotics at the site of action.

Biomedical Applications of TiO2 Nanostructures: Recent Advances.

Titanium dioxide (TiO2) nanostructures are one of the most plentiful compounds that have emerged in various fields of technology such as medicine, energy and biosensing. Various TiO2 nanostructures (nanotubes [NTs] and nanowires) have been employed in photoelectrochemical (PEC) biosensing applications, greatly enhancing the detection of targets. TiO2 nanostructures, used as reinforced material or coatings for the bare surface of titanium implants, are excellent additive materials to compensate titanium implants deficiencies-like poor surface interaction with surrounding tissues-by providing nanoporous surfaces and hierarchical structures. These nanostructures can also be loaded by diversified drugs-like osteoporosis drugs, anticancer and antibiotics-and used as local drug delivery systems. Furthermore, TiO2 nanostructures and their derivatives are new emerging antimicrobial agents to overcome human pathogenic microorganisms. However, like all other nanomaterials, toxicity and biocompatibility of TiO2 nanostructures must be considered. This review highlights recent advances, along with the properties and numerous applications of TiO2-based nanostructure compounds in nano biosensing, medical implants, drug delivery and antibacterial fields. Moreover, in the present study, some recent advances accomplished on the pharmaceutical applications of TiO2 nanostructures, as well as its toxicity and biocompatibility, are presented.

Graphene/poly (methyl methacrylate) electrochemical impedance-transduced chemiresistor for detection of volatile organic compounds in aqueous medium.

In this paper, an impedance-transduced sensor is developed based on a nanostructured graphene (GN) and poly (methyl methacrylate) (PMMA) sensing film for the detection of individual volatile organic compounds (VOCs) in aqueous media. Benefiting from a porous and high surface area, the nanostructured nanofiber is characterized by scanning electron microscopy (SEM) and optimized by the electrochemical impedance spectroscopy (EIS) technique. The recorded EIS data indicate the selective recognition of four VOCs of interest at a constant pH while there is no redox probe. The non-faradaic responses to each analyte at different concentrations are correlated with a three-element equivalent circuit (resistances of the solution and the film, and a pseudo-capacitance). To analyze the ability of the sensing film in distinguishing between VOCs with similar average boiling points, the values of the individual equivalent circuit elements are used as features and clustered in three-dimensional (3D) plots. Among the features, the two representing the maximum differences between the VOCs are represented in a two-dimensional (2D) plot to show the selectivity of the sensor. The feature extraction analysis demonstrates that the constant phase element (CPE) of the equivalent circuit is a more accurate predictor of VOCs than the interfacial capacitance. These results show high selectivity of the sensorial platform due to the synergistic pairing of nanostructured GN and PMMA.

Fabrication of SnO2 Composite Nanofiber-Based Gas Sensor using the Electrospinning Method for Tetrahydrocannabinol (THC) Detection.

This paper presents the development of a metal oxide semiconductor (MOS) sensor for the detection of volatile organic compounds (VOCs) which are of great importance in many applications involving either control of hazardous chemicals or noninvasive diagnosis. In this study, the sensor is fabricated based on tin dioxide (SnO2) and poly(ethylene oxide) (PEO) using electrospinning. The sensitivity of the proposed sensor is further improved by calcination and gold doping. The gold doping of composite nanofibers is achieved using sputtering, and the calcination is performed using a high-temperature oven. The performance of the sensor with different doping thicknesses and different calcination temperatures is investigated to identify the optimum fabrication parameters resulting in high sensitivity. The optimum calcination temperature and duration are found to be 350 °C and 4 h, respectively and the optimum thickness of the gold dopant is found to be 10 nm. The sensor with the optimum fabrication process is then embedded in a microchannel coated with several metallic and polymeric layers. The performance of the sensor is compared with that of a commercial sensor. The comparison is performed for methanol and a mixture of methanol and tetrahydrocannabinol (THC) which is the primary psychoactive constituent of cannabis. It is shown that the proposed sensor outperforms the commercial sensor when it is embedded inside the channel.

A Nanostructured Microfluidic Artificial Olfaction for Organic Vapors Recognition.

Selective and sensitive detection of volatile organic compounds (VOCs) is of great importance in applications involving monitoring of hazardous chemicals or non-invasive diagnosis. Here, polymethyl methacrylate nanoparticles with acetone recognition sites are synthesized and integrated into a 3D-printed microfluidic platform to enhance the selectivity of the device. The proposed microfluidic-based olfaction system includes two parylene C-coated microchannels, with or without polymer nanoparticles. The two channels are exposed to 200, 400, 800, 2000, and 4000 ppm of VOCs (methanol, ethanol, acetone, acetonitrile, butanone, and toluene), and sensor responses are compared using a 2D feature extraction method. Compared to current microfluidic-based olfaction systems, responses observed between coated and uncoated channels showed an increased recognition capability among VOCs (especially with respect to acetone), indicating the potential of this approach to increase and fine-tune the selectivity of microfluidic gas sensors.

A selective chemiresistive sensor for the cancer-related volatile organic compound hexanal by using molecularly imprinted polymers and multiwalled carbon nanotubes.

A chemiresistive sensor is described for the lung cancer biomarker hexanal. A composite consisting of molecularly imprinted polymer nanoparticles and multiwalled carbon nanotubes was used in the sensor that is typically operated at a voltage of 4 V and is capable of selectively sensing gaseous hexanal at room temperature. It works in the 10 to 200 ppm concentration range and has a 10 ppm detection limit (at S/N = 3). The sensor signal recovers to a value close to its starting value without the need for heating even after exposure to relatively high levels of hexanal. Graphical abstract Schematic presentation of a chemiresistive sensor for detection of hexanal, a cancer biomarker. The hexanal-imprinted polymeric nanoparticles were synthesized, mixed with multiwalled carbon nanotubes and coated on the surface of an interdigitated electrode to produce a nanocomposite chemiresistor gas sensor for hexanal.

Preparation of liposomal doxorubicin-graphene nanosheet and evaluation of its in vitro anti-cancer effects.

In recent years there has been much interest in development of multifunctional drug delivery systems. In this work, liposomes that contain doxorubicin (Dox), a potent anticancer drug, and graphene nanosheets (GNS) were prepared. The GNSs have excellent optical properties, such as photoluminescence which enables tracking of the liposomes, high absorption in ultra violet region of electromagnetic spectrum which can be exploited in photodynamic and photothermal therapy, and low toxicity to mammalian cells. Nanoliposomes were prepared using the thin film hydration method. Dox and GNSs were loaded to the liposomes during the hydration of the lipid film. Liposomes were characterized and the profile of in vitro drug release, cellular uptake, and cytotoxicity of the prepared liposomes on MCF-7 cells were determined. Despite the earlier reports, the liposomes have kept their spherical structures in the presence of GNSs. The cytotoxicity of liposomal Dox and GNSs were shown to be higher than the free forms of them. Novel nanoliposomes that contain GNSs have provided a multi-functional system with the potential of tracking, photodynamic and photothermal therapy. Further improvements of this versatile nanosystem would be promising for treatment of cancer.

Digging deeper into volatile organic compounds associated with cancer.

Volatile organic compounds (VOCs), produced and emitted through the metabolism of cancer cells or the body's immune system, are considered novel cancer biomarkers for diagnostic purposes. Of late, a large number of work has been done to find a relationship between VOCs' signature of body and cancer. Cancer-related VOCs can be used to detect several types of cancers at the earlier stages which in turn provide a significantly higher chance of survival. Here we aim to provide an updated picture of cancer-related VOCs based on recent findings in this field focusing on cancer odor database.

Silver Sulfadiazine Encapsulated in Lipid-Based Nanocarriers for Burn Treatment.

Burn injuries are at risk of bacterial infection because of the damaged skin and reduced immune responses. Silver sulfadiazine, a potent antibacterial agent, is considered as a standard therapy for burn treatment. Recent advances in nanotechnology have had an immense impact on drug delivery systems particularly in burn healing. Lipid-based nanocarriers have been considered as efficient drug delivery systems for burn treatment. This review presents a comprehensive overview of silver sulfadiazine-based nanocarriers and their application in the conservative healing of burn wounds.

Cancer Odor Database (COD): a critical databank for cancer diagnosis research.

Database URL: http://bioinf.modares.ac.ir/software/cod/.

Bio-nano hybrid materials based on bacteriorhodopsin: Potential applications and future strategies.

This review presents an overview of recent progress in the development of bio-nano hybrid materials based on the photoactive protein bacteriorhodopsin (bR). The interfacing of bR with various nanostructures including colloidal nanoparticles (such as quantum dots and Ag NPs) and nanoparticulate thin films (such as TiO2 NPs and ZnO NPs,) has developed novel functional materials. Applications of these materials are comprehensively reviewed in two parts: bioelectronics and solar energy conversion. Finally, some perspectives on possible future strategies in bR-based nanostructured devices are presented.